Accessories System

A variety of professional accessories for a complete waterproof system. From installation to sealing — everything in one place.

Plastic Threaded Nails

Specialized adhesive for bonding XPS backer boards to substrates, board-to-board joints, and finish materials.

300 ml cartridge / 590 ml sausage pack

Apply evenly with a caulking gun on bonding surfaces. Press and secure until cured. Reinforce with suitable mechanical fixings where required.

S1 Waterproof Rubber Membrane

Applied at backer board joints, pipe penetrations, corners, and other wet-area details to form a flexible waterproof layer.

1 kg bucket

Ready to use. Apply two to three coats with a brush or roller, allowing proper drying time between coats. Reinforce joints with compatible mesh tape.

Pipe Collar

Waterproof sealing accessory for floor drains and pipe penetrations through tile backer board assemblies.

Multiple sizes for common pipe diameters

Slide the collar over the pipe and bond the base to the board surface with compatible waterproofing membrane. Ensure a tight fit around the penetration.

Corner Waterproof Fabric

Reinforcement fabric for inside corners, outside corners, wall-to-floor joints, and shower tray transitions.

Roll or pre-cut pieces

Embed the fabric into compatible waterproofing membrane at corners and transitions before tile installation.

Stainless Steel Washers

Used with screws to distribute fixing pressure
and securely fasten XPS tile backer boards,
helping prevent damage to the board surface.

Bulk carton packaging

Install with compatible screws at the required spacing for the substrate and board thickness.

Anchors

Mechanical fixing accessory for attaching tile backer board to suitable wall or floor substrates.

Bulk carton packaging

Select anchor type according to substrate condition and follow the required fixing pattern.

Plastic Threaded Nails

Plastic fixing component used to support secure board installation where the project detail requires it.

Bulk carton packaging

Install through the board into the prepared substrate following the project fixing layout.

Plastic Corner Trowe

Installation tool for smoothing waterproofing material and adhesive at corners and detail areas.

Single tool or carton packaging

Use during waterproofing and adhesive application to form cleaner corner details.

Waterproofing Accessories Guide

How accessories complete a backer board waterproofing system

Tile backer board projects need more than boards alone. Seams, corners, pipe penetrations, fixing points, tray transitions, and heavy fixture zones should be planned with the correct waterproofing accessories so distributors can offer a complete bathroom waterproofing system.